Universal dispenser gun for 50 ml cartridge system. Ratio 1 : 1. Very practical for occlusal extraction. Class I. Designations & References: Pack of 48 intra oral tips: 16-053 Dispenser gun : 16-054
Graduated mixing block, ideal for mixing impression materials by condensation. Characteristics: Presentation: 25 sheets. Dimensions: 19 x 9.8 cm. Reference: 1-979
The metal support to put the Bite-Trays into position. Class I. Designations & References: Metal support: 211-134 Box of 5 metal supports: 1-696
Automatic mixer for dental impression materials for homogeneous, bubble-free mixing and precise dosage. Reference: 205-325
Non impregnated gingival retraction cords. Indications: Cord for gingival retraction before taking a dental impression or setting up the braces, crowns, bridgework. Characteristics: – Knitted retraction cord, 100% cotton – Length of the cord: 254 cm – Super absorbent – Knitting interlocking chains allow to support important quantities of hemostatic solution – Cord doesn’t fray […]
Addition silicone for bite registration. Indications: Shore A hardness: 95 Time to set in the mouth: 60 sec. Colour: orange Properties: – Imperceptible consistency for the patient. – Easy to use and bubble-free. – Fluid to prevent pressures, discomfort and sliding during positioning. – Precise: Accurate reproduction of occlusal details. – Stable: A dimensional variation […]
Automatic mixing tips for Turbomix Pack of 50 mixing tips for automatic mixer+ 2 rings Class I Reference: 16-489
Yellow intra-oral mixing tips for Turboflex – ratio 1:1. Pack of 48 mixing tips Class I Reference : 16-053
Yellow mixing tips – ratio 1:1. Pack of 48 mixing tips Class I Reference : 16-052
Universal Green mixing tips for 50 ml system. Packing of 48 mixing tips Class I Reference : 100-114
The metal support for positioning the Bite-Trays. Designations & References: Metal support: 211-134 Pack of 5 metal supports: 1-696
Unperforated stainless steel impression trays. Characteristics: – Stainless Steel Impression Trays with retention rim. – Made from high quality 18/8 stainless steel. – Sterilizable in autoclave to 134°C during 18 minutes. – European superior quality production guaranteed. Available in 10 sizes or set of 10. Medical Device of Class I Designations & Références : Upper […]
High quality aluminium, perforated impression trays. Properties: – Autoclavable to 180°C. – Laser-sealed handle. No sharp edges. – EUROPEAN SUPERIOR QUALITY production guaranteed. – Available in 12 sizes (6 upper and 6 lower). Made from high quality aluminium, easy to deform for a better adaptation in mouth. Medical Device of Class I Designations & References: Upper […]
Metal impression trays for two opposing quadrants. Suitable for autoclaving at 140 °C. Medical Device of Class I Designations & References: Large model, per unit: 211-405 Small model, per unit: 211-406
High quality, perforated, stainless steel impression trays. Properties: – Autoclavable to 180°C. – Laser-sealed handle. No sharp edges. – EUROPEAN SUPERIOR QUALITY production guaranteed. – Available in 12 sizes (6 upper and 6 lower). Made from high quality 18/8 stainless steel, rust-proof. Guarantee: 10 years Medical Device of Class I Designations & References: Upper (U): […]
Paper sectional recording support allowing impression of two antagonist parts in occlusion. Characteristics: Metallic support: Can be sterilized by autoclave up to 140°C. Possiblity to choose between straight (for posterior sections) and curved (for anterior sections). Medical Device of Class I Designations & References: Box of 50 straight: 211-132 Box of 50 curved: 211-133
Condensation cured silicone material for all two step technique impressions (wash technique, double mix). Turbosil Putty: – Very-high viscosity due to its final rigidity, Turbosil can be used individually as a tray material. – Turbosil flows easily to guarantee perfect cohesion of the putty to the light body and increases compatibility of the 2 viscosities. […]
Turbomix is a complete range of vinyl polysiloxane impression materials for automatic mixing. Indications: 3 differents viscosities : Turbomix can be used in double mix technique as in the wash technique. All Turbomix products are compatible with Turboflex light from R&S. Properties: – Excellent reproduction of details. – Different colours for an optimal contrast. – […]
Adhesive for plastic and metalic impression trays used for alginate impressions. Advantages: – The impression material will not shift or be dislodged upon removal. Use: – Sprayed on the tray’s internal surface, leaving an adhesive film. – A few seconds later, the surface is in perfect condition for loading impression material. Reference: 1-097
Adhesive for plastic and metallic trays used for alginate impressions. Advantages: – The impression material will not shift or be dislodged upon removal. Use: – Apply with brush on the tray’s internal surface leaving an adhesive film. – A few seconds later, the surface is in perfect condition for loading impression material.. Reference: 16-275
Fast-setting type 1, class alginate, dust-free. Characteristics: Remarkably accurate, Turboprint Class is extraordinary precise, mixes easily and presents a homogeneous consistency. It offers excellent quality impressions. Reproduces detail up to 25 µm. Properties: – Mixing time: 30s – Setting time: 1min – Total working time: 2min – Flavour: Mint – Colour: Light blue Medical Device […]
Fast-setting alginate, dust-free. Characteristics: Turboprint Chroma changes colour during the different stages of work to indicate its setting time with remarkable precision. Its pleasant flavour makes it the perfect alginate for children. Properties: – Mixing time: 45s – Setting time: 1min – Total working time: 2min 25s – Flavours: Fruity, tropical-citrus fruit – Colours: Fuchsia, […]
Fast-setting orthodontic alginate, type 1, class B, dust-free. Characteristics: Due to its fast setting stage, Turboprint Ortho reduces the risk of distorsion and gives high-precision impressions. Properties: – Mixing time: 45s – Setting time: 1min – Total working time: 2min 25s – Flavour: Strawberry – Colour: Salmon pink Medical Device of Class I Manufacturer: CFPM […]
Fast-setting alginate, type 1, class B. Characteristics: Dust-free and extremely fast, Turboprint Ortho Speed ensures high-precision impressions. Properties: – Mixing time: 30s – Setting-time: 1min 15s – Total working time: 25s – Colour: Pink – Flavour: Tutti frutti Medical Device of Class I Manufacturer: CFPM Reference: 1-993
Indications: HydroSoft answers the requests of the customers which looked for a formula like Aquasil from DENTSPLY, especially for the feeling during the mixing of the putty and its presentation in big conditionings. Properties: – For high precision impressions: exceptional reproduction of the details. – Soft and pleasant mixing of the putty. – Good wettability […]
Indications: HydroSoft answers the requests of the customers which looked for a formula like Aquasil from DENTSPLY, especially for the feeling during the mixing of the putty and its presentation in big conditionings. Properties : – For high precision impressions: exceptional reproduction of the details. – Soft and pleasant mixing of the putty. – Good […]
Turboflex is a complete range of vinyl polysiloxane addition silicones. Indications: – Turboflex silicones consistency is suited to the “Wash technique” and to double mixing. – Turboflex has quite a long working time, followed by a very short setting time. Properties: – Exceptional detail reproduction. – Thixotropic: washes are easily injected and do not overflow […]
Plastic bags for the transportation of impressions. Characteristics: – Hermetic zip-seal – One side comprises an outer pocket for patient information documents – The other side is treated to allow writing straight onto the bag! – Packaged in a dispensing box. Reference: 103-268
Indications: – Very resistant curved spatula. Reference: 1-756 – Mixing bowl Ø 11.5 cm. Reference: 1-750 Medical Device of Class I Manufacturer: CFPM
Very resistant curved blue spatula. Available in blue and white. Designations & References: White spatula : 103-66202 Blue spatula : 103-66201
Choose color style
